Horizontal Autoclave is one of the main equipment for deep sterilization in medical institutions, scientific research institutions, pharmaceutical factories, and biological product production enterprises. The principle is to use high-temperature and high-pressure steam to sterilize items, achieving a safe and hygienic effect. The Horizontal Autoclave with drying function can not only sterilize items, but also remove moisture inside the items, avoiding the growth of bacterial communities again, thus achieving a more complete sterilization effect. Common horizontal pressure steam sterilizers with drying function include hydraulic barrel type, portable, fully automatic type, etc. This equipment is widely used in hospitals, pharmaceutical factories, food processing factories, and other fields.
Intelligent control system: Adopting the BRIGHT I intelligent operating system, it can automatically compensate for control parameter values according to environmental changes
High definition large screen display: 7-inch touchscreen full color operation screen, with key parameters such as sterilization temperature, sterilization time, sterilization program, working status diagram, alarm information, Gregorian time displayed on the same screen
Data management system: supports curve viewing and data viewing. Real time curves, historical curves, and historical data can be searched and viewed in time intervals, making it easy to trace curve data back
Supports direct viewing of alarm information, with functions such as instant stop when opening the door, power outage recovery, fault self-diagnosis, door delay alarm, and temperature abnormality alarm
Multiple preset programs: 9 built-in sterilization programs+3 melting and insulation programs, and the operator can modify and save the programs. The next sterilization can be directly called
Sample time mode: The sterilization program can be set to start timing when the sample temperature reaches the set temperature, helping operators grasp the actual sterilization time of the sample
Positive pressure pulse exhaust: 6-stage cold air emission program can be set to ensure complete cold air emission
Rapid cooling system: After sterilization, it can accelerate the cooling rate and shorten the door opening time
Low water level dual protection: water level detection probe+anti dry burning probe dual low water level protection, low water level cannot start sterilization program
The steam generator automatically feeds and replenishes water, ensuring that the water level in the steam generator is controlled within a reasonable range
Equipped with pre vacuum function, ensuring complete discharge of cold air and improving the penetration of saturated steam
Equipped with pulsating vacuum drying function, ensuring that special samples can be directly dried after sterilization, and there is no open water in the chamber, so there is no need for high-pressure drainage during drying
|
Model |
BXW-280SD-GI | BXW-360SD-GI | BXW-500SD-GI |
| Volume [L] | 280 | 360 | 500 |
| Door Structure | spoke | ||
| Power [kW] | 14.6 | 17.6 | 19.1 |
| Power Supply [V, Hz] | 380, 50 | ||
| Temp. Range [°C] | 105~135 | ||
| Internal Dimensions [mm] | Ø600×1050 | Ø700×1050 | Ø700×1450 |
| Housing Dimensions W×D×H[mm] | 1000×1515×1803 | 1000×1515×1803 | 1000×1915×1803 |
Factory ADD：No. 55 Zhengfeng Road, Caozili Town, Wuqing District, Tianjin City，China
Tel/Wechat：8618522872961，8613012283680(Whatsapp)
E-mail：CHINAHJHT@outlook.com
Copyright © 2026 Tianjin HJHT Instrument Co.,Ltd
Current location：